SmartBank relay based split charge controller.
* Automatic split charging for 2, 3 or even 4 battery banks.
* Dual sensing enabling charge connection to either battery.
* Ultra low power consumption.
* "Lossless" design eliminates need for alternator controllers.
* Additional cabling only thus retaining factory warranties.
General Specifications Downloads Details
Power supply voltage range|
(auto selection of 12/24 volt systems)
Power consumption - standby mode
Power consumption - connected mode
Maximum Dimensions (mm)
SW180 relay maximum dimensions (mm)
9 to 40 volts|
< 0.4mA (< 400uA)
< 2mA plus relay coil
138 X 62 X 33
125 X 61 X 54
Web site and all contents Copyright SmartGauge Electronics 2005, 2006, 2007, 2008. All rights reserved.
Page last updated 02/04/2008.
Website best viewed on a computer of some sort.